Victron Energy RS 48/6000 230V Smart Solar

The Victron Energy RS Smart Solar inverter is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage 80-450 VDC, 4 kW MPPT solar charger. Thanks to its modern design and high frequency technology, the inverter weighs only 11 kg and has excellent efficiency, low standby power and very quiet operation.

The Victron Energy RS Smart Solar is equipped with a display to show battery, inverter and solar charger details. These parameters can also be read out via Bluetooth from the VictronConnect app. In addition, the inverter has a VE.Direct and a VE.Can connection for connection to a GX device for system monitoring.
Off-grid solar inverter

The Victron Energy RS Smart Solar Solar 48/6000 is a 48V 6 kVA inverter with 450 VDC 4 kWp PV input. It is used in off-grid solar applications where AC power is required.
Combination of an inverter, bidirectional DC-DC converter and MPPT.

The Victron Energy RS Smart Solar generates a perfect sine wave capable of powering high output devices. It is powered by a bi-directional DC-DC converter that either charges the battery when excess solar energy is available or converts from the battery when it is needed.

Wide MPPT voltage range

80 - 450 VDC, with a PV starting voltage of 120 VDC.

Light, efficient and quiet

Thanks to high frequency technology and a new design, this powerful Victron Energy RS Smart Solar weighs only 11 kg. It also has excellent efficiency, low standby power and very quiet operation.

Display and Bluetooth

The display reads the battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Bluetooth-enabled device. In addition, Bluetooth can be used to set up the system and change settings with VictronConnect.

VE.Can and VE.Direct connection

For connection to a GX device for system monitoring, data logging and remote firmware updates.

Built-in PV isolator

The two parallel PV strings connected to the MC4 connectors can be safely isolated using the large built-in switch on the bottom of the unit.

I/O connections

Programmable relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron miniBMS.