Philippi System Monitor for display and control of all functions. Connectable to the P-BUS. Full colour TFT graphic display with touch screen and adjustable brightness of the display illumination.
Connection to the PBUS via M12 plug (DeviceNet/NMEA2000).
Two M12 terminating resistors and an M12 T adapter cable are included in the scope of delivery.
The Philippi System Monitor PSM2 serves as a central display and user interface. The Philippi System Monitor PSM monitors, controls and manages the electrical system. Several Philippi System Monitors PSM2 can be mounted side by side to display different information like tanks, batteries, current balance or AC grid at the same time. Alternatively, several Philippi System Monitors PSM2 can be installed at different locations on board in order to be able to query the desired information independently of each other. With the Philippi System Monitor PSM2 as the central unit, you can expand your on-board system bit by bit from the smallest expansion stage, e.g. with only one shunt SHC as the battery monitor, to the function as a multifunctional display or control panel in a digitally switched CAN bus system.
With the battery management shunt Philippi SHC 312 / 612 a battery group can be monitored.
With the shunt Philippi SHL 312 an energy balance can be established.
With the tank interface Philippi CMT2 up to 4 tanks can be monitored.
With the switching interface Philippi CMR4 4 switching functions can be realized.
With the AC interface Philippi CAV the AC system can be monitored.
With the temperature interface Philippi TPC4 up to 4 temperatures can be monitored.
Monitoring and control of the AC switching units Philippi LAU, the chargers series Philippi ACE as well as the energy management box Philippi EM-box.
When configuring your system, please also note the order for the corresponding M12 connection cables for connecting the individual components.
Operating voltage: 8 - 32 V
Current consumption: max. 110 mA, stand-by: 5 mA/12V
Dimensions: L 105 x W 105 x H 35 mm
Installation cut-out: 88 x 88 mm